Articulated Jib Crane Manipulator 2RM
Utilization:
To manipulate with loads inside production and storage halls by using a hung hoist with the special hangers.
Advantage: easy manipulation in limited spaces - can reach around the corner, has maximum utilization of lifting in low-headroom spaces.
Technical description of the basic version:
The first beam of a circular profile is fixed to the ball bearings shaft that is attached to a swing bed which balances the axis of the beam to prevent it from spontaneous and unwanted rotation.
The second beam of a rectangle profile is articulated to the first arm from above or from below. There is the hoist hung at the end of the second beam. The adjustable hardstops on the shaft flange are used to prevent the first beam to spin 360° around or to set the specific workspace.
The column of the manipulator is provided with three standard heights – 2100 mm, 2600 mm, 3100 mm. Standard summary length of both beams – 2000 mm, 2500 mm, 3000 mm. On special requests also other sizes of the column or the beams can be made. The rotating beam can be mounted on a columns, walls or overhead fixed.
Basic technical specification:
Load capacity: | max. 350 kg |
Reach (mm): | max. 4500 mm |
Weight of manipulator: | 50 – 250 kg (by version) |
Label: | 2RM (load capaciy) (reach) (equipment) |
Example: | 2RM 125-2500 E(R)( / 3000 (Electro, (manual), Pneu) |
Optional equipment:
E - Electrical installation 400 V with power switch and cabling
- Hoist GIS or Demag with load capacity of 125, 250, 350 kg
R - Without electrical installation, e.g. chain handling of the hoist
P - Pneumatic components with closing valve and the filter of the
compressed air.
Price list
169 000 CZK
- + transport and assembly
- + revisions
- + other accessories
Technical specification
Reach of manipulator: | Maximal weight of load: |
up to 3000 mm | 350 kg |
up to 4000 mm | 250 kg |
up to 4500 mm | 125 kg |
Gallery
Realisations
Below we present you some of our realizations related to this product. These are some examples. If you are interested in more, please do not hesitate to contact us and we can discuss your specific requirements.

Semperflex Optimit, Odry EN

Lasmetal s.r.o., Vyškov

Krnovské opravny a strojírny a.s.

Iveco Czech Republic a.s., Vysoké Mýto

HESTEGO a.s., Vyškov

Graziano Trasmissioni Czech s.r.o, Červený Kostelec

REMAK,a.s. Rožnov

BOSCH Termomechanika, Albrechtice

DT Výhybkárna a strojírna, a.s. Prostějov

MAHLE Behr, Ostrava, s.r.o.

INPEX pro f.UNIKOV, Martin SK

SURFIN, s.r.o., Brno

Terex Material Handling, s.r.o., Slaný

Taforge a.s., Kopřivnice

Hydroscand Service s.r.o., Přerov

Siemens Elektromotory s.r.o., Frenštát pod Radhoštěm

Vesuvius Česká Republika a.s., Třinec

Semperflex Optimit s.r.o., Odry

TILL s.r.o., Loštice

Iveco Czech Republic, a.s., Vysoké Mýto

STÖRI MANTEL s.r.o., Rožnov p.R. - Dvouramenný manipulátor 2RM

Monroe Czechia s.r.o., Hodkovice nad Mohelkou

KARLA s.r.o., Opava
